What are the four indicators of LED display video advertising industry?

People in the industry of full-color LED display screen strive to organize and establish the industry standard of LED display screen, so as to correctly guide users to understand the performance index of full-color LED display screen and standardize the market of full-color LED display screen. What are the four main performance indicators of full-color LED display?

1. Fényerősség

There is no clear characteristic requirement for “Fényerősség”. Because the use environment of full-color LED display is very different, and the ambient brightness is different,

For most complex products, as long as the corresponding test methods are specified in the standard, the supplier shall provide a list of performance data (product information), which is better than the specific performance requirements given in the standard. These are all in line with international standards, but this also leads to unrealistic comparison in bidding, and users do not understand this, resulting in many bidding documents required “Fényerősség” is often far higher than the actual needs. Ebből adódóan, it is suggested that in order to guide users to correctly understand the “Fényerősség” performance index of LED display, it is necessary for the industry to give a guidance: in some occasions, under different illumination conditions, the brightness of full-color LED display can meet the requirements.

2. Main wavelength error of primary color

The main wavelength error index of primary color is changed from “primary color wavelength error” to “primary color main wavelength error”, which shows that this index reflects a characteristic of full-color LED display screen. The dominant wavelength of a color corresponds to the hue of the color observed by the human eye. The performance requirements specified in this industry standard can not be understood as the indicator of color uniformity of LED display. So, does it first guide users to understand the terms, then the measurement standard, or does it first understand and understand the full-color LED display from the perspective of customers, and then provide users with understandable and understandable performance characteristics?

3. Duty cycle

Just like the “performance principle” mentioned above, “as long as possible, the requirements should be expressed by performance characteristics, not by design and description characteristics. This method leaves great room for technological development”. We believe that “duty cycle” is purely a requirement of design technology, and should not be used as a performance index of P2.5 LED display panel product standard. We all know that which user will care about the driving duty cycle of the display screen, and what they care about is the display effect, not our technical realization. Why should we make this kind of technical barrier ourselves to restrict the technical development of the industry ?

4. Refresh frequency

From the point of view of measurement method, it seems to ignore the real concern of users. It also does not take into account the different driving IC, driving circuit and mode used by various manufacturers of full-color LED display, which leads to the difficulty of testing. Take the full-color LED display screen as a light source, that is, the flicker frequency of the light source. We can directly test the light source flicker frequency of full-color LED display screen with instruments similar to “light sensitive frequency meter” to reflect this index. We have done this test, using oscilloscope to measure any color of LED driving current waveform to determine the “refresh frequency”, 200 Hz measured in the white field; in the 3-level gray level and other low gray level, the measured frequency is as high as more than 10 kHz, and measured with PR-650 spectrometer; whether in the white field, or in the gray level of 200, 100, 50, the measured light source flicker frequency is 200 Hz.

The above points are just a simple description of the characteristics of several full-color LED displays. There are also many “working life”, “mean time between failure” and so on encountered in the bidding. No test method can confirm whether the LED display meets the requirements of stability, reliability or life in a short time; these requirements should not be specified. The producer can make a guarantee, but it can not replace the requirement. It is a business concept, a contract concept, not a technical concept. The industry should have a clear statement on this, which will be very beneficial to users, producers and the whole industry.

As for how to guide users to correctly understand such a complex system of products as full-color LED display, it is still necessary for the industry association to hold more technical forums on full-color LED display screen, start from reality, analyze the product from the perspective of users, and guide users to correctly understand the full-color LED display screen.