Precautions for using LED electronic display

LED electronic display screen is the most widely used advertising display tool, and its advantages of energy saving and environmental protection are widely recognized and favored by customers. But recently, we often see some people say that led display screen is prone to bad points and short service life.

In order to reduce the damage of LED display screen, I summarized some precautions in the LED display use, hoping to help you.

Switching sequence of LED electronic display screen:

When you turn on the screen, you should first turn on and then turn on the screen; when you turn off the screen, you should first turn off the screen and then turn it off. In this way, it can prevent LED large screen from appearing high bright spot, burning diode and bad point in case of power on;

2. When the screen is switched on and off for many times, the time interval should be at least 5 minutes to 10 minutes to prevent the diode from burning out in a short time

Third, try to turn on the LED display screen after the computer enters the engineering control software. Reduce working time and prolong service life;

Fourth, try to avoid opening the display screen under the pure white screen to prevent the impact of large current in a short time on the display screen;

5. Pay close attention to the temperature change, reduce the working time when the temperature is high;

If the power switch of the display screen often trips, in order to ensure the safety of the display screen, it should be turned off first and then checked.

The above six points are the precautions in the use of LED electronic display, as long as you pay attention to it.

WhatsApp us